FRONT RADIUS ROD BUSH UPGRADES FROM SIMPLE DIYer to FULL RACE!

The Zeta II platform on the Camaro is outstanding. For those that want to enhance the front performance, we offer several upgrades to improving the performance of the front radius rod bushing.

[EP6578 PEDDERS FRONT SNUBBERS FOR OE RADIUS ROD

http://forums.peddersusa.com/imagehosting/74bd089c2ee33e.jpg

This kit is seriously easy to install and requires very little dissassembly. It is the perfect job for a DIYer.

The best front radius rod upgrade involves pressing out the OE subframe bushing and pressing in our Pedders complete subframe bushing kit

[CENTER]PEDDERS EP6577 COMPLETE FRONT HD RADIUS ROD BUSHING (https://secure.merlinsoftware.com.au/peddersusa/default.aspx?ProdCode=EP6577)

http://forums.peddersusa.com/imagehosting/74bd090e9c943f.jpg

The above picture shows the Pedders EP6577 properly installed and properly lubed


THIS PICTURE SHOWS YOU THE OE SNUBBER INSTALLED
http://forums.peddersusa.com/imagehosting/74bd089c47d590.jpg


THIS PICTURE SHOWS YOU THE OE SNUBBER PARTIALLY REMOVED
http://forums.peddersusa.com/imagehosting/74bd089c575bdb.jpg


THIS PICTURE SHOWS YOU THE OE SNUBBER REMOVED
http://forums.peddersusa.com/imagehosting/74bd089c5e77ea.jpg

AS A NOTE, THE OE SNUBBER POPS OFF WITH A SCREWDRIVER!

THIS PICTURE SHOWS THE PEDDERS AND OE SNUBBERS
http://forums.peddersusa.com/imagehosting/74bd089c3d6ba6.jpg


THIS PICTURE SHOWS THE PEDDERS SNUBBER INSTALLED
http://forums.peddersusa.com/imagehosting/74bd089db4cb92.jpg[/CENTER]

Again, the snubber offers the OE front radius rod bushing a huge amount of support and is a perfect job for the DIYer. A complete install manual will be available for this very soon.

If you have any question, just ask

mike
dms